MicroCV Challenge

All fields are required*

First Name:
Last Name:
Title:
Institution:
Phone:
Fax:
Email:
Street Address:
City:
State:
Zip:
Current Customer? Yes No
Main Distributors:

Answer at least 4 questions correctly and receive this FREE AUDIT MicroControls Value Backback with cinch closure that can be carried on one shoulder or as a backback.

  1. The CLIA-88 regulations for calibration verfication state that calibration verification is required:
    1. Once every six months
    2. When you see a drift in your daily quality control results
    3. After a major preventive maintenance or replacement of a critical part
    4. All of the above
    5. Only A and C
  2. Which of the following does CLIA define as acceptable calibration verification material:
    1. Any patient samples
    2. Pooled serum
    3. A solution that has a known amount of a specific analyte
    4. All of the above
  3. Which of the following assays do not require routine calibration verification:
    1. Prothrombin time
    2. Free T3 and/or Free T4
    3. Urine Magnesium
    4. Only A and C
    5. All of the above
  4. If your analyzer performs a 3 point calibration, are you required to perform calibration verification?
    1. Yes
    2. No
    3. Only if your analyzer performs this calibration at least once every six months
  5. CLIA requires that you run calibration verification using:
    1. A zero or minimal value at or near the lower limit of the instrument's reportable range
    2. A mid-point value
    3. A maximum value at or near the upper limit of the instrument's reportable range
    4. A minimum of 3 points anywhere within the instrument's reportable range
    5. Only A, B and C